Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Cabinets-Speakers => Topic started by: supro66 on October 07, 2010, 05:36:56 am

Title: Cross over network
Post by: supro66 on October 07, 2010, 05:36:56 am

If you build an amp speaker cabinet

say you use a tweeter, mid range and a woofer speaker

3 speakers

How would you design a crossover network and would you want to

I know you can buy them made up

Title: Re: Cross over network
Post by: stingray_65 on October 07, 2010, 09:49:17 am

http://www.audiokarma.org/

Bunch of cork sniffers there, but they are a friendly group, like here, and they don't look that far down their noses at guitar amp junkies. ( lot of them play guitars and understand)

Not saying by any means the fine men here may not have the answers, But those guys eat and  breathe that sort of stuff.

Ray

Title: Re: Cross over network
Post by: sluckey on October 07, 2010, 11:17:53 am

A guitar and guitar amp played thru a cab like you describe will probably destroy the tweeter and the midrange speaker too.

Title: Re: Cross over network
Post by: supro66 on October 07, 2010, 01:29:07 pm

Quote from: sluckey on October 07, 2010, 11:17:53 am

A guitar and guitar amp played thru a cab like you describe will probably destroy the tweeter and the midrange speaker too.

Thank you that is why I asked the question

just use 4 speakers or two right