Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Other Topics => Topic started by: stingray_65 on October 15, 2010, 11:17:52 am

Title: Making headway on my new shop
Post by: stingray_65 on October 15, 2010, 11:17:52 am

A few pics of finishing the drywall in my new shop.

What an adventure to get this far.

The CNC is in a few shots, More equipment to come in the next couple weeks.

Title: Re: Making headway on my new shop
Post by: tubesornothing on October 15, 2010, 12:52:11 pm

Wow, hell of a gantry on that CNC - does the gantry move or is it a moving table?

Title: Re: Making headway on my new shop
Post by: EL34 on October 15, 2010, 12:55:56 pm

Nice!!!

Hey, this may be something you are interested in doing
I set up a probe in Mach3 to find edges, surfaces and centers.
http://www.el34world.com/Forum/index.php?topic=10294.0

Title: Re: Making headway on my new shop
Post by: stingray_65 on October 15, 2010, 10:57:50 pm

The gantry is stationary, that gives the rigidity for me to cut steel.
The Y axis moves in and out through the opening of the gantry.

Doug, I got to follow up on that edge finder, This Mach 3 stuff is still pretty new to me. right now tho I'm too fuzzy to think clearly enough.

My new servo will be here tomorrow at12:30 when the mail gets dropped off. unless they rout it through Lansing.

With a touch of luck I should be able to cut out a Telecaster body in foam by 3 pm.