Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: GrungeMan on October 17, 2010, 11:14:14 am

Title: Revibe Board
Post by: GrungeMan on October 17, 2010, 11:14:14 am

Doug

The blank Revibe board that you sell, is it the same as the Torevibe board?
Does one have to specify which version when ordering?
I'm thinking of ordering a Torevibe board and turrets.
Thanks

Grungy  :undecided:

Title: Re: Revibe Board
Post by: FYL on October 17, 2010, 12:29:09 pm

"ReVibe - Reverb/Vibrato stand alone unit
With the Tore-T ReVibe mod"

From http://www.el34world.com/schematics.htm

Scroll down to the ReVibe section.

Title: Re: Revibe Board
Post by: GrungeMan on October 17, 2010, 02:24:48 pm

Nothing there stating which Revibe it is.

but,

I did find on the Board Parts page at the top stating the Revibe blank board is actually the Torevibe.

Thanks  :grin:

Title: Re: Revibe Board
Post by: FYL on October 17, 2010, 03:06:28 pm

Quote

Nothing there stating which Revibe it is.

Revibe + Tore T mods = Torevibe

"Tore-T is a European gentleman that came up with a very cool mod that eliminates the hum that the original ReVibe had.
I modded my personal ReVibe with the Tore-T mod and it is dead quiet.
I would recommend building this version and not the original version."

"The original Re-Vibe had quite a bit of background hum.
I am not making a board for the original ReVibe
This section is here just for info purposes"

Title: Re: Revibe Board
Post by: EL34 on October 18, 2010, 05:41:05 pm

Quote

The original Re-Vibe had quite a bit of background hum.
I am not making a board for the original ReVibe
This section is here just for info purposes

From the library page as FYL has already copied above.

Anywho, I added the words Tore-T to the Revibe board description in case someone wants the old Revibe circuit with lots of hum.
This lets them know that I don't make the original Revibe, only the Tore-T revibe circuit.

Title: Re: Revibe Board
Post by: GrungeMan on October 18, 2010, 06:06:50 pm

Much clearer now.
Thank you

Grungy  :grin: