Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => AmpTools/Tech Tips => Topic started by: kagliostro on November 07, 2010, 08:00:03 am
-
I find this link
http://www.diytube.com/phpBB2/viewtopic.php?t=1465&start=7
There are two pages (page 24 and 25) from Electronics World july 1964
There is an article about how to identify Power Transformers Ratings
using two diagrams
I assume they refers to 60Hz, if someone knows how to read it for 50Hz I'll be happy to know
Thanks
Kagliostro
p.s.:
I'm looking for a best copy of this two pages, if you know were they can be find, please, let me know
-
> read it for 50Hz
Don't worry about it.
If the data were based on weight, there would be a large difference, maybe 20%. But the data is ohms per volt. A 50Hz design won't be the same as a 60Hz design, but very similar. The estimate is not exact. The difference 50Hz/60Hz is less than the uncertainty.
-
Don't worry about it.
Thanks PRR
Kagliostro