Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: firemedic on January 20, 2011, 10:44:12 pm

Title: 6-pin Marshall power switch
Post by: firemedic on January 20, 2011, 10:44:12 pm

I'm rebuilding my old Laney again, this time it will be a TOS. It has an old Marshall style 6-pin power switch which still lit when I took the amp apart last year. Does anyone know how to wire these 6-pin switches so they light up when they're on?

Title: Re: 6-pin Marshall power switch
Post by: sluckey on January 21, 2011, 05:27:01 am

Does this help?

(http://www.el34world.com/charts/images/mar_switch.gif)

Title: Re: 6-pin Marshall power switch
Post by: EL34 on January 21, 2011, 11:45:09 am

Thanks Steve
You got to it before me.

Firemedic,
That diagram Steve posted is on the library page.

Title: Re: 6-pin Marshall power switch
Post by: firemedic on January 21, 2011, 12:12:47 pm

Yeah, I saw that too. I didn't know if the same rules applied to the 6 pin switch tho. I'll hook it up like a 4-pin & if it works, cool, if not, whatever. I have a Fender pilot on the back panel anyway. Thanks y'all.