Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: chuggy on January 23, 2011, 03:54:49 pm

Title: Line out with multitap OPT
Post by: chuggy on January 23, 2011, 03:54:49 pm

Is it OK to run a line out from the tap of a multitap OPT that is not connected to the speaker cab?

Thanks-
Jim R

Title: Re: Line out with multitap OPT
Post by: JayB on January 23, 2011, 05:53:07 pm

Quote from: chuggy on January 23, 2011, 03:54:49 pm

Is it OK to run a line out from the tap of a multitap OPT that is not connected to the speaker cab?

Thanks-
Jim R

Yeah, your ok. Just pad it with a 10k resistor in series with a 10k pot wire as a resistor to ground to match to what you need. You could get fancy with it if you wanted too.