Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => AmpTools/Tech Tips => Topic started by: kagliostro on March 01, 2011, 04:28:55 am

Title: How to obtain a low price threaded Insert puller from a riveter
Post by: kagliostro on March 01, 2011, 04:28:55 am

Hope this can be of some interest

A friend of mine developer this simply idea as to obtain a low price Threaded Insert puller

all the text is in italian but as it is a video I hope you can anyway understand the process

http://www.vagus.it/tech_tirainserti.htm

You must open the riveter, pull out all inside pieces, make the right diameter holes on the nozzles an use some little pieces of threaded rod, one for each insert diameter


Kagliostro

Title: Re: How to obtain a low price threaded Insert puller from a riveter
Post by: jjasilli on March 02, 2011, 03:29:33 pm

Pretty cool.  Seems like something similar could be done to swage a turret!

Title: Re: How to obtain a low price threaded Insert puller from a riveter
Post by: kagliostro on March 03, 2011, 09:38:41 am

Hi JJasilli

look to Ritchie200 idea here

http://www.el34world.com/Forum/index.php?topic=10951.0

Kagliostro