Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: RobBozic on May 16, 2011, 05:54:30 am

Title: Q re: Paralleling inputs internally for plexi
Post by: RobBozic on May 16, 2011, 05:54:30 am

Hi guys,

When you only have one input and you still want to have the first two gain stages run in parallel, are there any differences to running two 33K resistors (to pins 2 & 7), or if you just run a single 33K to pin 2 & then a wire from pin 2 to pin 7?

Thanks in advance
Rob

Title: Re: Q re: Paralleling inputs internally for plexi
Post by: sluckey on May 16, 2011, 06:31:03 am

Quote

or if you just run a single 33K to pin 2 & then a wire from pin 2 to pin 7?

That's how I did it. I don't think there would be any sound differences or benefits with two resistors.

Title: Re: Q re: Paralleling inputs internally for plexi
Post by: kagliostro on May 16, 2011, 07:04:22 am

Vox solution for linked channels

Kagliostro