Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: kagliostro on June 03, 2011, 01:57:02 pm
-
http://www.traynoramps.com/default.asp?p1=7&p2=0&p_id=30 (http://www.traynoramps.com/default.asp?p1=7&p2=0&p_id=30)
UPDATE: This is the new link
http://traynoramps.com/support/manuals_spec_sheets (http://traynoramps.com/support/manuals_spec_sheets)
Hope this can be of some interest
Kagliostro
I like the 6v6 + 12au7 (final tubes) in DH15H DarkHorse 15H
-
Totally! Traynor are stand up people to outright publish this... You will see a lot of Kevin O'Connor designs in these schematics.
-
My fingers are tired. Saved them all
-
grazie kaglio... :-)
bummed no DH40 service manual. to me, it seems to be the most interesting in their current line up.
--DL
-
Here's a coincidence... Just got a YCV80 on the bench. It has a switching problem. These just may be the toughest amps to work on. Multiple circuit boards piled on top of each other and a chassis the clam shells with the iron on one half and the guts on the other all connected together.
http://www.traynoramps.com/downloads/servman/smycv80.pdf (http://www.traynoramps.com/downloads/servman/smycv80.pdf)