Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: LooseChange on July 24, 2011, 06:02:48 am

Title: Guild Thunder 1
Post by: LooseChange on July 24, 2011, 06:02:48 am

On the bench for general maintenance. Very clean inside. Couldn't find the exact schematic... I understand the circuit is the same as the Thunder 1 with reverb (minus the reverb)

Title: Re: Guild Thunder 1
Post by: Steve_P on July 24, 2011, 07:43:11 am

http://letstalkguild.com/phpBB2/viewtopic.php?f=7&t=24141 (http://letstalkguild.com/phpBB2/viewtopic.php?f=7&t=24141)

Title: Re: Guild Thunder 1
Post by: LooseChange on July 24, 2011, 08:41:02 am

Cool... All about the Thunder 1 with reverb.  Too many missing photos though.
I had one of these in the shop a couple of years ago.

Title: Re: Guild Thunder 1
Post by: Tone Junkie on July 24, 2011, 02:05:37 pm

Neat looking amp thanks for the amp porn LooseChange.
Bill
                                                           :happy1: :happy1:

Title: Re: Guild Thunder 1
Post by: DummyLoad on July 24, 2011, 03:19:22 pm

cool amp.

nice EMI shield there in the center. wonder if it actually does help.  :icon_biggrin:

--DL