Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Solid State => Topic started by: TerryD on August 21, 2011, 06:53:17 am

Title: Marshall 75 Reverb
Post by: TerryD on August 21, 2011, 06:53:17 am

I'm getting "Ghost" distortion all the time.  I hit a note or chord and it's "followed" by distortion.   I fixed the input which was cracked off in one corner from the board and cleaned all the pots.  Someone did some work in the middle of the board and there is some smoke on the board>  I don't know if its new or old.

Title: Re: Marshall 75 Reverb
Post by: stratele52 on November 06, 2011, 03:23:38 pm

I never work on this amp , it is a solid state ?

Could be a bad solder or printed circuit damaged