Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: TIMBO on August 29, 2011, 02:50:10 am

Title: Power Amp Rewire (Plexi Gain 20 )
Post by: TIMBO on August 29, 2011, 02:50:10 am

Hi guys, I was not sure how i should wire the power amp to be able switch between the two sets of tubes, so i wired it as per the first drawing and it works great. jeff posted another way of doing it with less wires (great, less wires is good) can i get an OK for this.Thanks

Title: Re: Power Amp Rewire (Plexi Gain 20 )
Post by: sluckey on August 29, 2011, 06:24:46 am

Looks OK to me.

Title: Re: Power Amp Rewire (Plexi Gain 20 )
Post by: TIMBO on August 29, 2011, 02:27:39 pm

Thanks Sluckey, i had thoughts of flicking the ELs as both sets of tubes sounded pretty much the same (ELs sounded a little sharper) and the 6V6 were able to handle the higher voltages, but i thought "what the hell i'll just leave it as is and see what happens". Thanks