Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: mpayne on August 30, 2011, 08:17:59 pm

Title: Pot substitution question
Post by: mpayne on August 30, 2011, 08:17:59 pm

I’m implementing this effect loop out of Merlin’s preamp book and was wondering if I could use a different pot for R55?  The schematic in the book shows a 1Meg linear and I was wondering if a 500K linear would work?  Would the smaller value change the amplitude (or anything else) that much? 

Thanks,
Mike

Title: Re: Pot substitution question
Post by: PRR on August 31, 2011, 12:24:44 am

Do it.