Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: mike9 on September 20, 2011, 01:46:15 am
-
Dan was gracious enough to modify this amp for me and what a stellar job he did at that. Since that time I've replaced the main caps - thank your Mr. Hoffman for prompt service - everything went well with the upgrade from original. Lately I had to flesh out an order to get free shipping from an AMAZON vendor so I got some TungSol KT66's as they draw the same filament current as a 6L6CG. OK I removed the clam shells as advertised then installed the spring retainers, tubes and biasd to 35MA @ 500P/V. Damn this thing sounds good - much more harmonic complexity coming from the high end and I actually had to turn the bass up a tad on both channels.
Overall it was the upgrade with the biggest effect I've done to the amp since modding it in the first place!!!!11
-
Yep a fresh set of output tubes can do wonders
-
Hi Mike.
What took you so long to jump on this forum? I've got a set of KT66's in my Super Reverb too. They sound great, especially when I set the volume up around 6.
Glad you are still liking the amp. It's been a while.
-
I tried JJ 6L6GCs, TS 5881s, and Sovtek 6L6WXT+s in my TOS before landing on the TS KT66s- what a difference.
Where does one find the hardware to mount them in upside-down Fender chassis? I'm dying to try them in my Vibroverb......
-
This may work...
http://www.tubesandmore.com/scripts/foxweb.dll/moreinfo@d:/dfs/elevclients/cemirror/ELEVATOR.FXP?item=S-H143 (http://www.tubesandmore.com/scripts/foxweb.dll/moreinfo@d:/dfs/elevclients/cemirror/ELEVATOR.FXP?item=S-H143)
-
Thx sluckey, good site. The price is right anyway...