Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: traynormk2 on October 06, 2011, 08:46:38 am

Title: Seperating outputs on traynor amp
Post by: traynormk2 on October 06, 2011, 08:46:38 am

Hello,

  I have an early 70's Traynor ygl-3a head. It is a dual input amp with two output jacks on the back. Is it possible to seperate the outputs on the back so that the 1st channel feeds one and the 2nd channel feeds the other so that I can run a stereo cabinet. Any help would be greatly appreciated.

Title: Re: Seperating outputs on traynor amp
Post by: sluckey on October 06, 2011, 11:54:31 am

No. Even though there are two preamps there is only one power amp. The two speaker jacks are simply parallelled.

Title: Re: Seperating outputs on traynor amp
Post by: traynormk2 on October 06, 2011, 02:29:37 pm

Makes sense.  Thanks for the quick reply.