Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => AmpTools/Tech Tips => Topic started by: moonbird on October 06, 2011, 02:21:29 pm

Title: Epson PCB printer hack
Post by: moonbird on October 06, 2011, 02:21:29 pm

Hello all -

Wasn't quite sure where to put this post. Hopefully this is the right place. I have been watching with interest the EPSON ink jet printer hack on the following URL:

   http://www.el34world.com/Misc/PCB/PCB1.htm (http://www.el34world.com/Misc/PCB/PCB1.htm)

I was able to obtain one of these printers quite cheap. My questions are:

   1. Any new word on this project??
 
   1. To Doug - If it ends up being successful would you consider selling the two frame supports for others to modify their printers?? thx,

Title: Re: Epson PCB printer hack
Post by: stingray_65 on October 06, 2011, 10:28:12 pm

Make sure it works!

I bought one a while back and it was plugged up.

LOL like anything electronic, It got the screwdriver before it hit the trash!

Next time I'm wearing rubber gloves when I take apart a printer!!


Ray

Title: Re: Epson PCB printer hack
Post by: moonbird on October 07, 2011, 02:44:05 pm

 :l2: LOL. Great advice!!