Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Blind Lemon on October 10, 2011, 10:18:17 am

Title: Need a Chassis 5D2
Post by: Blind Lemon on October 10, 2011, 10:18:17 am

Got an original 5D2 cabinet only. Looking for an either original or repo chassis. The 5F2A chassis is too wide. Needs to be 13.5 inches wide. Any help would be appreciated.

BL :help:

Title: Re: Need a Chassis 5D2
Post by: dpm309 on October 11, 2011, 10:58:21 am

Did you check out Weber's website?  They sell several repro chassis but do not list the size.  You would have to call them to get the dimensions.

Dan

Title: Re: Need a Chassis 5D2
Post by: Blind Lemon on October 11, 2011, 05:01:38 pm

Yes I did, the 5F2A is too wide.

Thx
BL

Title: Re: Need a Chassis 5D2
Post by: HotBluePlates on October 11, 2011, 06:59:06 pm

I think you may be stuck with following up on the contact the other forum gave you. I can't find anyone who sells an actual 5D2 chassis, so you'll likely have to have one made.

Title: Re: Need a Chassis 5D2
Post by: Blind Lemon on October 13, 2011, 06:08:20 pm

I already ordered one from Brian. I looked and tried to find one also to no avail.

BL