Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: pbman1953 on November 05, 2011, 08:35:43 am

Title: Do I need to re-bias?
Post by: pbman1953 on November 05, 2011, 08:35:43 am

I just installed new filter caps, do I need to re-bias. I replaced withe same value but at a higher voltage rated cap

Title: Re: Do I need to re-bias?
Post by: FYL on November 05, 2011, 09:43:54 am

Checking the bias after any mod or repair is a good idea. Just in case...