Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => PC Express and JSchem - Schematics and Layout diagrams => Topic started by: tubenit on December 26, 2011, 07:50:46 am
-
These ideas are based on a thread someone posted wanting a very low wattage recording amp in the style of Fender AB763.
With the VVR, one could run 6L6, 6V6, or 6K6 power tubes. I personally like cathode biased amps and I think experimenting with 47uf to 220uf cathode cap range that one could get a close AB763 type tone.
These are just ideas & I have not built them. CHECK for ERRORS!
It was suggested by someone that the vibrato on the 6G16 may need to be VVR'd also?
With respect, Tubenit