Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: LooseChange on March 27, 2012, 06:59:17 pm
-
Sock Turlet board is done and installed.
http://fydamps.com/photo3.html (http://fydamps.com/photo3.html)
-
Very nice job LC!!
How did you set up the out? Plate driven?
Best Regards
R.
-
Yes, it's just like what Jerry Garcia did with his Twin Reverb in his setup.
I do notice that when patched directly into a Fender power amp 9exactly as if it were a single combo, there seems to be more drive than I would expect. Seems odd due to the exact same circuits just in two pieces.
Thanks!
-
WOW!
:worthy1:
-
LC,
You always do such magnificient work! That looks fantastic. Great job.
With respect, Tubenit
-
Seems odd due to the exact same circuits just in two pieces.
Is your HT close to what is expected @ twins?
Amazing work!!!
Best Regards
R.
-
Thanks!
Yes, the HT is exactly the same as the Twin.
I used a Dumbleator (Tube effects loop) as an attenuator and the sound was amazing.
-
Call me a fan. :icon_biggrin:
-
WOW Looks Very Very Cool (http://www.guitargear.net.au/discussion/Smileys/default/thumbzup.gif)(http://www.guitargear.net.au/discussion/Smileys/default/thumbzup.gif)
Kagliostro
-
Ran it through a complete Jerry setup. Replaced the Big Twin Reverb on it's side with this.
Sounded great and lost the weight... Jerry would have been proud.
-
Ran it through a complete Jerry setup.
What's a Jerry setup? :dontknow:
Brad :icon_biggrin:
-
Ran it through a complete Jerry setup.
What's a Jerry setup? :dontknow:
Brad :icon_biggrin:
Scan through this site (http://www.wald-electronics.com/preampmods.html) for some interesting background on the Jerry setup
Wow nice job on the Twin pre-amp, that's beautiful!
-
Loose , can you tell me about the transformer you're using in this build.. voltage ratings, etc. ?
-
thanks
-
Awesome work!!!!
-
WOW!
:worthy1:
+1 That's just beautiful!
Chip
-
Sock Turlet board is done and installed.
Every time I read "Turlet", I can't help but think of the place where a Redneck goes to relieve himself... :laugh:
-
Ha! Thanks for the additional kind words.
-
Just an update for TRP 2.0.
Added a reverb dwell and back plate for power inlet.
-
Looks great!
-
Very nice additions Dan!
Brad :icon_biggrin:
-
Hmmmm,,,, now I wonder where I might have gotten some of the idea to build this little guy :think1:
Thanks for being here and sharing, and the inspiration that your project leant to mine!
:thumbsup:
-
Thanks!
Nice SILVERGUN!
-
Always humbled by the professional work shown on here. :worthy1:
-
Updated graphics.
-
Great looking preamp! Fantastic job, well done.
With respect, Tubenit
-
Very Cool :thumbsup:
Franco
-
Very nice Dan!
(Where you been?)
Brad :icon_biggrin: