Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Sev on May 23, 2012, 04:54:07 pm

Title: Marshall tube socket wiring
Post by: Sev on May 23, 2012, 04:54:07 pm

Being a nube I thought it would be a simple swap to change tube sockets on this 1992 Marshall 900 Dual Reverb 4500 mod 50W head.
I keep blowing fuses and know there's something wrong. I've researched hundreds of schematics and found the most helpful was a common picture, but still blowing fuses
Any suggestions?

Title: Re: Marshall tube socket wiring
Post by: Willabe on May 23, 2012, 06:09:05 pm

Welcome Sev.

Try reposting this in _ Tube Amp Building _ section. The guys will see it there and give you a hand.


                  Brad       :icon_biggrin:

Title: Re: Marshall tube socket wiring
Post by: TubeGeek on May 25, 2012, 12:20:11 am

Start with posting good pics for us to look over...

Title: Re: Marshall tube socket wiring
Post by: sluckey on May 25, 2012, 06:23:34 am

Why did you change the sockets? Was it blowing fuses before you changed sockets?