Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: kagliostro on July 19, 2012, 05:30:35 pm

Title: Tapped Pots - what about to use conductive silver paint to obtain it ?
Post by: kagliostro on July 19, 2012, 05:30:35 pm

Sometime there is the necessity to substitute a tapered tapped pot with a new one

or we would like to try a schematic but is impossible as the tapered tapped pots aren't disposable now

What about to use conductive silver paint to tapper a normal pot ?

Someone has experimented that ?

http://docs-europe.electrocomponents.com/webdocs/001e/0900766b8001ed35.pdf (http://docs-europe.electrocomponents.com/webdocs/001e/0900766b8001ed35.pdf)

http://it.rs-online.com/web/p/adesivi-composti-per-circuito-stampato/1015621/ (http://it.rs-online.com/web/p/adesivi-composti-per-circuito-stampato/1015621/)

also exist a resistive glue that may be can be used for that purpose

Thanks

K