Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: tubenit on August 07, 2012, 02:55:32 pm

Title: Active FX box & standby?
Post by: tubenit on August 07, 2012, 02:55:32 pm

I can understand a standby using solid state rectification on power tubes ........

However, does there really need to be a standby switch on a single 12A_7 being used as an FX loop?

With respect, Tubenit

Title: Re: Active FX box & standby?
Post by: sluckey on August 07, 2012, 03:19:10 pm

I would not use one.

Title: Re: Active FX box & standby?
Post by: tubenit on August 08, 2012, 06:46:23 pm

Sluckey,

Always grateful for your input and help, my friend!  Thank you!

With respect, Tubenit