Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Other Topics => Topic started by: tubeswell on September 23, 2012, 03:56:53 am

Title: Homemade woodbox
Post by: tubeswell on September 23, 2012, 03:56:53 am

I had his junk T&G rimu* timber lying around for quite a while, and about 6 months ago I decided to make it into a firewood box (for the living room fireplace). Well, after 6 months of sitting around partly finished in the garage accumulating cat fur and sick balls, I finally dusted it off and finished it today while the weather was fine. (My youngest son gave it 2 coats of timber oil)

*Native NZ hardwood conifer with a darkish grainy look

Before the staining

(http://farm9.staticflickr.com/8298/8014372750_2f6ea7af1b_z.jpg)

After the staining

(http://farm9.staticflickr.com/8439/8014370133_178d1908c3_z.jpg)

Title: Re: Homemade woodbox
Post by: John on September 23, 2012, 08:21:51 pm

You guys make me hang my head with your woodworking stuff!  :laugh: I have two woodcarts I built out of scrap plywood and lumber. Although, they are on casters, so I can roll them  into the mud room and not have to go outside to get wood.  :icon_biggrin:

Title: Re: Homemade woodbox
Post by: Platefire on October 07, 2012, 12:13:28 am

Where you going to mount the chassis and speakers at???  :dontknow: