Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: printer2 on October 21, 2012, 09:36:29 pm
-
Doing the rounds. Probably a little off but should be in the ballpark. Set some of the values to null out the bass circuit in the James section of the Duncan Tone Stack Calculator. The bass control acts as the volume and the treble as the tone. Make C3 relatively large and you have a normal tone cut circuit.
(http://i406.photobucket.com/albums/pp142/printer2_photo/guitar%20amp/TweedToneStackCalculator.jpg)