Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => AmpTools/Tech Tips => Topic started by: kagliostro on November 09, 2012, 12:34:58 pm

Title: A very intriguing new product - WOW
Post by: kagliostro on November 09, 2012, 12:34:58 pm
Here the final product

http://www.ukcnc.info/forums/coilwinder.php (http://www.ukcnc.info/forums/coilwinder.php)

Here the prototype

CNCDudez CNC Coil Winder (http://www.youtube.com/watch?v=uX2iCRdSFmI#ws)

I like this thing very much !

K
Title: Re: A very intriguing new product - WOW
Post by: DummyLoad on December 01, 2012, 08:58:17 pm
nice. ty for sharing.

--DL

Title: Re: A very intriguing new product - WOW
Post by: twbranch on January 11, 2013, 04:22:45 pm
If you can build an amp you can build a coil winder way cheaper than that thing. I built one for school using sourced parts that would have cost about 250us! The counter is difficult but not too bad!
Title: Re: A very intriguing new product - WOW
Post by: PRR on January 11, 2013, 07:15:35 pm
> The counter is difficult

Cheap calculator (good ones don't do this).

Tack wires to the "=" key contacts, to a flipper/finger on the spindle.

Before a wind, hit "C" "1" "+". Then turn. Each "=" increments by 1.

"C" "12345" "-" "1" and turn will count down from 12345 to zero.
Title: Re: A very intriguing new product - WOW
Post by: DummyLoad on January 11, 2013, 09:46:14 pm
what ever happened to good 'ol 7490s and 7447s or 4026/4033s if you're a CMOS smoker...   

--DL
Title: Re: A very intriguing new product - WOW
Post by: twbranch on January 12, 2013, 06:49:26 am
Quote from: PRR on January 11, 2013, 07:15:35 pm
> The counter is difficult

Cheap calculator (good ones don't do this).

Tack wires to the "=" key contacts, to a flipper/finger on the spindle.

Before a wind, hit "C" "1" "+". Then turn. Each "=" increments by 1.

"C" "12345" "-" "1" and turn will count down from 12345 to zero.

Never thought of that! Good idea!
Title: Re: A very intriguing new product - WOW
Post by: kagliostro on January 13, 2013, 03:48:06 pm
One other way is to build a cam and use one of this

(http://www.sicutool.it/DesktopModules/Catalogo/imgMed/4426GR.jpg)

K