Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: JBP on November 18, 2012, 06:42:08 pm

Title: Stout Reverb question
Post by: JBP on November 18, 2012, 06:42:08 pm

I'm building  a Stout Reverb as a christmas present. This is my first go at tube reverb and am wondering what would be the appropriate reverb tank for this circuit. I see there are several impedance options. Thanks

Title: Re: Stout Reverb question
Post by: HotBluePlates on November 18, 2012, 06:53:12 pm

Doug has 2- and 3-spring versions in his store. Either will work in that amp.

I personally like the 9AB2C1B (3-spring that Accutronics calls "6-spring" with Medium delay) for reverb.

Title: Re: Stout Reverb question
Post by: triode on November 19, 2012, 06:06:20 am

I second that, second that, second that, second that, second that...