Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: silverfox on January 18, 2013, 10:16:10 pm
-
I want to take the output from two of the standard active FX loop circuits found here- The Dumbleator circuit? and mix them with a balance pot- Level of Channel A vs Channel B or vice versa and feed that into a mono power amp.
Is this a feasible way to mix say a Marshal and Dumble and two effects chains? Will is sound decent in your opinion or is this a waste of time?
Silverfox.