Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 17, 2005, 09:32:21 pm
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> speaker magnet - power tube distance
<< Prev Topic | Next Topic >>
Author Comment
ganzonimx
Hey get your own solder
Posts: 391
(2/17/04 1:07 pm)
speaker magnet - power tube distance
--------------------------------------------------------------------------------
I just found this morning a 12" speaker that fits my 5E3 built, sure not a great speaker but it will do the job. I realized that the speaker magnet will be just 1" from the center of the 6V6, is that a problem? Would the magnetic field disturb the electron flux inside the tubes?
Cris
Tiny Daddy
I will work on all amps
Posts: 492
(2/17/04 10:07 pm)
Re: speaker magnet - power tube distance
--------------------------------------------------------------------------------
No problem with the magnetic field. Just be sure the tubes cannot hit on the metal due to the vibration.
ganzonimx
Hey get your own solder
Posts: 393
(2/18/04 6:29 pm)
Re: speaker magnet - power tube distance
--------------------------------------------------------------------------------
Thanks TD
I installed the speaker, and also played around the tubes with a magnet, absolutely no change in tone.
Cris
geoffreyreed
I will work on all amps
Posts: 318
(2/22/04 12:09 am)
Re: speaker magnet - power tube distance
--------------------------------------------------------------------------------
Did you ever work out that Flux Capacitor thing Doc????
ganzonimx
Hey get your own solder
Posts: 408
(2/26/04 1:02 pm)
Re: speaker magnet - power tube distance
--------------------------------------------------------------------------------
Geoffry!
are you me ore is that a serious Q ?
Cris
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.