Hoffman Amplifiers Tube Amplifier Forum
Other Stuff => Cabinets-Speakers => Topic started by: Platefire on February 06, 2013, 11:27:52 am
-
Just ordered the panel for 1969 Pro Reverb I'm working on from MoJo parts for $27.00 plus $9.00 shipping=total $36.00. Considering the minimum order of one Yrd of black tolex for about $15.00 plus additional shipping not counting obtaining a 24 7/16" X 6" x 1/4" plywood and cutting it out---I thought it would be hard to beat!!! I could have made it, no problem but at this price it didn't seem worth the ware and tare on my part. Did I miss someting or is this a good value? Platefire
-
I would have done the same thing.
Brad :icon_biggrin:
-
If it is for a customer, make sure to give him the old part, as the vintage weenies would complain about it, but as long as you don't have to alter anything you're good.
Gabriel
-
Well, the upper back plate was missing. The customer said he had made an attempt to find a vintage one on e-bay but couldn't find one. So when I told him about the one mojo had, he said go for it. Also all his tube shields were missing. I had 3 on hand and ordered 3 more. Two preamp tubes had one screw missing from their sockets and I replaced those. He should have a whole amp now!
I got the backplate in yesterday and it was a perfect fit and tolex match. I'm waiting for the screws to come in to mount it. Platefire
-
Well, the upper back plate was missing. The customer said he had made an attempt to find a vintage one on e-bay but couldn't find one. So when I told him about the one mojo had, he said go for it. Also all his tube shields were missing. I had 3 on hand and ordered 3 more. Two preamp tubes had one screw missing from their sockets and I replaced those. He should have a whole amp now!
I got the backplate in yesterday and it was a perfect fit and tolex match. I'm waiting for the screws to come in to mount it. Platefire
Well, that's a whole other thing, then.
Gabriel