Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => EZ Board postings => Topic started by: Geezer on June 17, 2005, 09:34:04 pm

Title: Add Effects loop to Doug's AB763 board  
Post by: Geezer on June 17, 2005, 09:34:04 pm

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > Add Effects loop to Doug's AB763 board      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
Searing
Junior tube assistant
Posts: 67
(1/28/04 1:39 pm)
 Add Effects loop to Doug's AB763 board
--------------------------------------------------------------------------------
 Can I add an Effects Loop to Doug's AB763 board I have in my Fender Twin 65 reissue (was a reissue, now it is the amp I built, with all of your help of course) I want to preserve that direct tone and not lose it by going thru all of my pedals first! Thanks!
Chris
 
LooseChange
Senior tube assistant
Posts: 194
(1/28/04 5:37 pm)
 Re: Add Effects loop to Doug's AB763 board
--------------------------------------------------------------------------------
 I have been thinking of changing the tremolo circuit into a buffered effects loop. It would use both halves of the tremolo tube. I don't have a schematic yet, but I am looking. Any help??
 
Searing
Junior tube assistant
Posts: 67
(1/29/04 11:36 am)
 Re: Add Effects loop to Doug's AB763 board
--------------------------------------------------------------------------------
 I don't know of any schematics, but would love one. What about what Doug has on the H-50 in his amp section, would it be similar I wonder? Would this loop you are speaking of, using the trem. circuit, be just an in and out to go through your outboard effects?
Chris
 
Funkalicousgroove
Junior tube assistant
Posts: 3
(2/27/04 5:22 pm)
  FX LOOP SCHEMATIC
--------------------------------------------------------------------------------
  Go to www.schematicheaven.com, click the link for rumble amps and look at the Dumbleator schematic. That's about the best circut for a buffered series effects loop I've seen, It will allow you to run stomp boxes in your Effects loop
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.