Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: ericlen838 on April 28, 2013, 02:46:04 pm

Title: Modern Marshall Voltage selector switch hook-up question
Post by: ericlen838 on April 28, 2013, 02:46:04 pm

This is my first amp build and I am hooking up my voltage selector switch and I have a question.  Pin 1 110v, pin 2 is 220V, and pin 3 is 230V.  Is pin 4,5,6 used for anything.

Title: Re: Modern Marshall Voltage selector switch hook-up question
Post by: sluckey on April 28, 2013, 03:33:23 pm

This should help...

http://forum.metroamp.com/viewtopic.php?f=3&t=2528 (http://forum.metroamp.com/viewtopic.php?f=3&t=2528)