Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: hesamadman on August 16, 2013, 07:10:54 am
-
EDIT: Damn I missed a whole section. Will return this evening!
So Ive been looking at the schematic and studying everything like you guys have said. I made my own layout on photoshop today. I used images from another layout for all my components. Copy and Paste :)
I literally just finished this. I havent got to double check it. Off to work now. But will look at it all day. A couple things that I did and hoping you can tell me if this is ok.
* The 5.6K resistors on pin 5 of the output tubes are connected by a wire to the .022UF caps on top of board. Well instead off having the loose resistors float around on the tubes pins I mounted them on top of board directly to caps. Any issues with this?
* There is a space of blank board over in the preamp section. I did this because I later on want to modify this with a voicing switch where it will switch from different cathode bypass cap values.
Thoughts?
-
yikes.....found a mistake. missing resistor and 500pf cap wiring wrong
-
Hey hesa,
I took a minute and pointed out a few things and got rid of your "grid lines"
Keep looking, and keep up the good work :thumbsup: