Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Ed_Chambley on November 22, 2013, 09:07:54 am
-
Steve,
I downloaded a incomplete schematic and layout when you were helping Barry with a Marshall style layout for a Vox build. Did you complete it? If so, can I have it? It would be a big help with a ongoing design I have been working on.
-
Do you want the original Visio format or PDF format?
-
Visio please. Thanks so much.
-
OK. It's on my website in the Drawing Board section.
http://home.comcast.net/~seluckey/amps/index.htm (http://home.comcast.net/~seluckey/amps/index.htm)
-
Ciao Steve
Also I've the schematic and layout saved by Ed_Chambley
Many Thanks for sharing the corresponding Visio file :thumbsup:
Franco
-
OK. It's on my website in the Drawing Board section.
http://home.comcast.net/~seluckey/amps/index.htm (http://home.comcast.net/~seluckey/amps/index.htm)
\
Thanks, got it.
-
Steve,
I downloaded a incomplete schematic and layout when you were helping Barry with a Marshall style layout for a Vox build. Did you complete it? If so, can I have it? It would be a big help with a ongoing design I have been working on.
Ed,
How's it going? What are you conjuring up at this point?
-
Steve,
I downloaded a incomplete schematic and layout when you were helping Barry with a Marshall style layout for a Vox build. Did you complete it? If so, can I have it? It would be a big help with a ongoing design I have been working on.
Ed,
How's it going? What are you conjuring up at this point?
Well you know I said I wanted a tube up design with some Vox type things. I has part of it, but it was only in PDF format. Visio is user friendly and has some features I will be needing.
In other words, I am too lazy to draw it all in Illustrator. Especially when I feel this is authentic circuit wise. There are quite a few different Vox AC-15 variants, plus you know I prefer tubes up.
I need to use a program I have a better handle on layout dimensions. Visio works well and you can apply measurements to items. Lots have already been made courtesy of Sluckey and Binwitt.
-
This thread has a schematic of an AC-15 and (reportedly) an original layout to go with it:
http://ampgarage.com/forum/viewtopic.php?t=22846 (http://ampgarage.com/forum/viewtopic.php?t=22846)
With respect, Tubenit
-
This thread has a schematic of an AC-15 and (reportedly) an original layout to go with it:
http://ampgarage.com/forum/viewtopic.php?t=22846 (http://ampgarage.com/forum/viewtopic.php?t=22846)
With respect, Tubenit
Thanks for the link. I actually had one years ago. 63 AC30. It had all the common problems you have heard. Heat and microphonic tube and so fourth. I sold it to buy a VW Bus.
I am not sure how much the perfect layout has on the tone of the amp, but there are problems with the original layout. Great for a reference. It is very good work on the layout and schematic.
-
As far as I can know here you can find the more exhaustive info for an AC15 clone with original layout
http://members.ziggo.nl/jheijer/AC15.htm (http://members.ziggo.nl/jheijer/AC15.htm)
here the complete layout, in the upper link you can find it in (with) more readable detail
(http://members.ziggo.nl/jheijer/images/bestuking-2.gif)
(http://members.ziggo.nl/jheijer/images/AMP-Klaar-5.gif)
Ciao
K