Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: tubeswell on July 13, 2014, 01:04:02 am
-
i.e.: for the caps that sit in the doghouse?
(Couldn't see it for looking in the on-line store)
TIA
-
Hi, I don't have a drilled board for filter caps.
You could make your own very easy
It's less than 15 lugs or eyelets
I mount mine along the front panel under the pots and eliminate all that monkey business
Here's my Hoffman AB763 amp
(http://el34world.com/Hoffman/images/IMG_0633.jpg)
-
Another easy method is to just set up terminal strips and string your caps between them
Super easy if you have some room inside the amp
-
Also, one more suggestion
Ever see the really old cap cans that had the caps glued inside with sticky rubber
And they had a wire bundle coming out a grommet hole?
No Board needed for that sort of arrangement
I always opt for not using a cap can, cap board and all that extra unneeded stuff
I really like having the filter caps inside the chassis and along the front edge under the pots
-
Thanks,
That was a bombed out Deluxe Reverb chassis that was part of a pile of amp junk I bought
The power transformer hole had been hacked
I installed one of my AB763 1 channel boards
I installed a 022798 power tranny which is the super reverb PT
I made a 2 x 10 baffle board for it
So it's a Super Deluxe Vibrolux reverb bastard :icon_biggrin:
I still have this amp
It's my go-to amp for clean surf stuff
-
Yes it is beautiful work!
Well if that's a SR PT in there now, then they must have hacked it for a Twin Reverb PT?
Brad :icon_biggrin:
-
Thanks and if I remember correctly, it had a twin PT sized hole and it might have had some bastard power tranny in it when I got it
This was in the late 90's and I have CRS disease
As you can see I had to use fender washers to get a grip on the chassis for the SR power tranny
Not to hijack this thread any more than I have but this is this amp
http://el34world.com/Misc/Music/files/1983Merman.mp3 (http://el34world.com/Misc/Music/files/1983Merman.mp3)
-
I think I have CRS disease too, but I can't remember...
-
:icon_biggrin:
-
Here's a couple pages in the library on Filter cap layouts
http://el34world.com/charts/filtercaps.htm (http://el34world.com/charts/filtercaps.htm)
http://el34world.com/charts/fenderservice7.htm (http://el34world.com/charts/fenderservice7.htm)
-
Hi Doug,
Do you have a photo of the caps under the pots that shows the view looking from the rear of the chassis? I'd like to see how you've mounted & ran the resistors. Also, is the white wires going to/from the pots all shielded? Hard to tell...
thanks-
-
I have a bunch of pics of the guts on this page
http://el34world.com/Hoffman/AB763Project.htm (http://el34world.com/Hoffman/AB763Project.htm)
(http://el34world.com/Hoffman/images/Dscn0294_small.jpg)