Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Buy - Sell - Trade => Topic started by: EL34 on July 21, 2014, 09:14:03 am

Title: Scratch and Dent sale on Transformers
Post by: EL34 on July 21, 2014, 09:14:03 am

I have a bunch of transformers that I have sat aside over the years that came in with dents in the endbell covers
There is nothing wrong with the transformers, just a dented endbell
You can pull off the endbell and use a block of wood and a hammer to fix the dent

It cost more to ship them back than if I just blow them out at a huge discount

PM me if you want any of the transformers shown below
Include the part number you want


Go here to see the transformer specs
http://el34world.com/Transformers/fentrans.htm (http://el34world.com/Transformers/fentrans.htm) - Fender style transformer specs

http://el34world.com/Transformers/marshall.htm (http://el34world.com/Transformers/marshall.htm) - Marshall Style transformer specs

Title: Re: Scratch and Dent sale on Transformers
Post by: EL34 on July 21, 2014, 09:16:31 am

1 sold - Quantity 4 left

Bassman output transformers
Or any 40 ish watt 2 x 6L6 amp

Part number 022855 - $25 each - reduced for shop clean out

See the specs page links in post #1

Title: Re: Scratch and Dent sale on Transformers
Post by: EL34 on July 21, 2014, 09:22:55 am

SOLD

Title: Re: Scratch and Dent sale on Transformers
Post by: DummyLoad on July 31, 2014, 09:05:55 pm

twin PT specs for PSU designer if anyone cares to have them:


blk - wht                120Vrms N.L.; 1.2DCR
red - red/yel          339Vrms N.L.; 11.7DCR   <<--- use these values for full wave CT. 
red - red                680Vrms N.L.; 22DCR
red/yel - red/blu      61Vrms N.L.; DCR not measured.
grn - grn                7.08Vrms N.L.; 0.5DCR


measured with a very fine kind of fluke 87 *true* RMS DMM.


--pete

Title: Re: Scratch and Dent sale on Transformers
Post by: EL34 on August 01, 2014, 06:09:04 am

Thanks for the info Pete