Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: punkykatt on July 21, 2014, 10:53:13 pm

Title: Install passive effects loop in AA1164 circuit
Post by: punkykatt on July 21, 2014, 10:53:13 pm

Where is the best place to install a passive effects loop in a PR  AA1164 circuit?  Im thinking, between the .02 cap and the 3.3M/10pf, so no reverb signal goes through the loop? Thanks for any input.  Punky


http://el34world.com/charts/Schematics/files/fender/Fender_PRINCETON_REVERB_AA1164.pdf (http://el34world.com/charts/Schematics/files/fender/Fender_PRINCETON_REVERB_AA1164.pdf)

Title: Re: Install passive effects loop in AA1164 circuit
Post by: kagliostro on July 22, 2014, 03:04:27 am

That seems the best choice


Franco

Title: Re: Install passive effects loop in AA1164 circuit
Post by: punkykatt on July 22, 2014, 06:56:51 pm

Thanks Franco