Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Other Topics => Topic started by: Platefire on October 18, 2014, 09:36:33 am

Title: How Much would Drake PCB PT and OT from a mid 90's JTM30 be worth???
Post by: Platefire on October 18, 2014, 09:36:33 am

I picked this up from a friend who had this amp and installed MM transformers in it and he's not an e-bayer and I am. So I was wondering if anyone knows the value on these things as I prepare to re-sell them. I understand the JTM30 was only produced from 1994 to 1997. These transformers don't have wire leads on them but the terminals only. My attempts to research a price on these haven't turned up much. I think Drake bit the dust years ago. Platefire

Title: Re: How Much would Drake PCB PT and OT from a mid 90's JTM30 be worth???
Post by: Jack_Hester on October 18, 2014, 10:13:53 am

Can't speak for the PT, but I replaced the OT for a friend last year, and got it from here:
 
https://www.tubesandmore.com/products/P-TMJTM30-O (https://www.tubesandmore.com/products/P-TMJTM30-O)
 
It was an exact match in appearance and connections.  Did not have Drake on it, and I don't remember the branding on it. 
 
This may be the same, for the PT:
 
https://www.tubesandmore.com/products/P-TMJTM30-P (https://www.tubesandmore.com/products/P-TMJTM30-P)
 
Jack

Title: Re: How Much would Drake PCB PT and OT from a mid 90's JTM30 be worth???
Post by: Platefire on October 18, 2014, 12:20:34 pm

Hello Jack

Thanks a bunch, that helps a lot. Knowing those are new Marshall replacements, I would need to start 50% to 75% below that I think. It would probably be easier to sell them separately but I may try them a set first. Thanks again! Platefire