Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: kagliostro on November 16, 2014, 04:28:32 am

Title: Question for Doug about his Stereo Preamp + Power Amp
Post by: kagliostro on November 16, 2014, 04:28:32 am

Ciao Doug

I was reading a post of Tubenit about FXLoop circuits

http://el34world.com/Forum/index.php?topic=10208.msg180163#msg180163 (http://el34world.com/Forum/index.php?topic=10208.msg180163#msg180163) post #28

And I remembered the configuration of your Stereo Preamp + Stereo Amp

there you have a CF followed by the TS on the Preamp and then the Output

and a recovery triode before PI on the Power Amp Input

I would like to know if you have tried your preamp output as a SEND for pedal effect and the Power Amp input as a RETURN

if you tried it or do, it will be interesting to read your comments

Thanks

Franco

Title: Re: Question for Doug about his Stereo Preamp + Power Amp
Post by: EL34 on November 16, 2014, 12:57:55 pm

Hi Franco,


I have never tried that


I only use my Stereo pre amp to send to the computer for recording purposes

Title: Re: Question for Doug about his Stereo Preamp + Power Amp
Post by: kagliostro on November 16, 2014, 01:01:12 pm

Thanks Doug

Franco