Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Bugman3183 on November 16, 2014, 08:33:08 am

Title: 6v6g
Post by: Bugman3183 on November 16, 2014, 08:33:08 am

Good morning all.  Just recently acquired a pair of marconi 6v6g's and the data sheets that I've seen says 315v for plates and 285v for screens.  That seems very conservative to me,  I wanted to try then in a
 5e3 that has 362v on the plates and 360v on the screens and was looking for advice on whether it would be safe to do so.  Thanks.

Title: Re: 6v6g
Post by: sluckey on November 16, 2014, 09:03:25 am

I would give it a try.