Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: EL34 on November 25, 2014, 04:25:11 pm
-
I started a 18 watt Stout build today to nail down the parts list/BOM and build info
I am using these parts
The new Stout Chassis (http://hoffmanamps.com/MyStore/catalog/parts6.htm)
18 Watt Heyboer Tranny set (http://hoffmanamps.com/MyStore/catalog/parts1.htm)
125C3A Choke (http://hoffmanamps.com/MyStore/catalog/parts1.htm)
Hoffman Stout Turret board (http://hoffmanamps.com/MyStore/catalog/PartsListIndex.htm)
Got all the major parts mounted and wired except the board and parts on the front panel
Here's some build pics
-
Inside shots
Back Panel
IEC power receptacle (http://hoffmanamps.com/MyStore/catalog/parts14.htm)
Fender Style Fuse holder (http://hoffmanamps.com/MyStore/catalog/parts14.htm)
Carling SPST power switch (http://hoffmanamps.com/MyStore/catalog/parts7.htm)
Rotary impedance selector switch (http://hoffmanamps.com/MyStore/catalog/parts7.htm)
Switchcraft L12 speaker jacks (http://hoffmanamps.com/MyStore/catalog/parts8.htm)
-
future use
-
future use
-
future use