Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: bakerlite on February 10, 2015, 09:18:20 am

Title: Adventures in Marshall. TSL122 => Sluckeys dual 50
Post by: bakerlite on February 10, 2015, 09:18:20 am

Hey folks - So all the parts bar a capacitor have arrived to convert my friends TSL 122 to a dual 50 (sluckeys design) .


In the process of gutting the compnents from the old amp and offering up my components,


The hammond is considerably bigger and I will have to make some dremel adjustments to the tube socket type doghouse thing so I can mount the Pt.


First question of the build - I knew it would be close but I didn't think it would be this close from the PT to the speakers -


Does the proximity of the PT to the speakers generally throw up any issues?


thanks

Title: Re: Adventures in Marshall. TSL122 => Sluckeys dual 50
Post by: sluckey on February 10, 2015, 12:18:24 pm

Quote

Does the proximity of the PT to the speakers generally throw up any issues?

I haven't had any problems.

Title: Re: Adventures in Marshall. TSL122 => Sluckeys dual 50
Post by: TIMBO on February 10, 2015, 07:34:01 pm

Hi bakerlite, It was so tight that I had to rotate the speaker so that the corner of the PT fitted in the hole in the speaker basket. No probs

Title: Re: Adventures in Marshall. TSL122 => Sluckeys dual 50
Post by: bakerlite on February 11, 2015, 05:07:13 am

Thats great thanks -


Its hard to beleive this 50w hammond is double the 100w original PT size!

Title: Re: Adventures in Marshall. TSL122 => Sluckeys dual 50
Post by: Willabe on February 11, 2015, 09:33:28 am

It's rated for full band width.


                    Brad    :icon_biggrin: