Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Cabinets-Speakers => Topic started by: supro66 on March 19, 2015, 12:00:57 pm

Title: Supro 6420 head
Post by: supro66 on March 19, 2015, 12:00:57 pm

this is my last build I think  :icon_biggrin:
I did the dovetails with an [ INCRA JIG ] you can Google it
I like the head over the speaker you can get easy access to controls
I also put holes in the bottom for cooling

Title: Re: Supro 6420 head
Post by: supro66 on March 19, 2015, 12:03:27 pm

I used a green Leather I used on my boat last year

Title: Re: Supro 6420 head
Post by: supro66 on March 19, 2015, 12:05:29 pm

I used Boat cleats on the bottom to store the power chord

Title: Re: Supro 6420 head
Post by: TNblueshawk on March 19, 2015, 03:16:02 pm

Looks great.
 
I got an INCRA jig a little over a year ago for my table saw but I got the one that does box cuts and not dove tails. Worked a treat.

Title: Re: Supro 6420 head
Post by: supro66 on March 20, 2015, 09:38:00 am

Here are my other 2 Supros the original and the first one I made with my Fender 5e3 tweed made green

Title: Re: Supro 6420 head
Post by: Willabe on March 20, 2015, 10:36:37 am

I like the 2 tone color schem with the tolex and wood.


                   Brad    :bravo1:

Title: Re: Supro 6420 head
Post by: supro66 on March 21, 2015, 09:28:01 am

once upon a time I made Formica counter tops and cabinets
I was in to good mind blowing drugs
like
Contact cement
Lacquer Thinner
M.E.K.
It makes you think out side the box
I played Guitar since I was 12 now 67
If I drink I can not play
how did them guys do it on drugs  :dontknow: