Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Mook on April 01, 2015, 04:51:37 pm

Title: adding a Power Amp IN?
Post by: Mook on April 01, 2015, 04:51:37 pm

So, the idea here is to plug straight into the Power Amp IN and access only the Power Section.     

My ideal situation is this:     I want to be able to use my Bassman power section coming from the preamp (preamp out) of another bass amp.

I've search for a schematic......but none to be found.....any ideas?


THanks!

Mook

Title: Re: adding a Power Amp IN?
Post by: sluckey on April 01, 2015, 05:37:34 pm

Install a jack just prior to the PI input cap. Look at this to see what I'm talking about...

     http://home.comcast.net/~seluckey/amps/november/november.pdf (http://home.comcast.net/~seluckey/amps/november/november.pdf)

Title: Re: adding a Power Amp IN?
Post by: Mook on April 01, 2015, 06:43:29 pm

Quote from: sluckey on April 01, 2015, 05:37:34 pm

Install a jack just prior to the PI input cap. Look at this to see what I'm talking about...

     http://home.comcast.net/~seluckey/amps/november/november.pdf (http://home.comcast.net/~seluckey/amps/november/november.pdf)

Ah!    Yes, that's exactly what I did.    So, I guess I have it wired wrong.    I'll have to re-check my wiring.    But, good to know my idea is exactly same as yours.     Thanks!!!


Mook