Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: MrPurple on April 14, 2015, 01:24:18 pm

Title: a few questions
Post by: MrPurple on April 14, 2015, 01:24:18 pm

1 On your stout amps is there a way to adjust gain other than on and off?
2. Are the mix and dwell related only to the reverb? 
3. Can the rever stout be tmb or only single tone control
4. Do u prefer the stout or plexi for lead?

Title: Re: a few questions
Post by: sluckey on April 14, 2015, 01:51:41 pm

Quote from: MrPurple on April 14, 2015, 01:24:18 pm

1 On your stout amps is there a way to adjust gain other than on and off?
2. Are the mix and dwell related only to the reverb? 
3. Can the rever stout be tmb or only single tone control
4. Do u prefer the stout or plexi for lead?

1. Yes. See the note on the schematic.
2. Yes.
3. No. You would have to modify the TMB version to include reverb.
4. I have never heard either of these amps. Maybe Doug will speak up.

Title: Re: a few questions
Post by: MrPurple on April 14, 2015, 05:42:45 pm

Having trouble locating note..Which resistor?   I suppose i could just put in a VR for slope

Title: Re: a few questions
Post by: MrPurple on April 14, 2015, 05:45:36 pm

Never mind i found it

Title: Re: a few questions
Post by: tubenit on April 14, 2015, 08:41:12 pm

Lots of examples of a one tube reverb that could be added to a 18w amp or a Plexi 6V6.

http://el34world.com/Forum/index.php?topic=7957.0 (http://el34world.com/Forum/index.php?topic=7957.0)

With respect, Tubenit