Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: John on April 27, 2015, 12:19:52 pm

Title: reverb transformer....
Post by: John on April 27, 2015, 12:19:52 pm

I just realized while reading wiring diagrams that on the secondary I have the black to the jack, and the green to ground. It's working fine as is, but should I swap those wires anyway?

Title: Re: reverb transformer....
Post by: eleventeen on April 27, 2015, 01:22:31 pm

Doesn't matter. It's an AC 2-wire signal and we don't care about the phasing. (Reverb phasing is "every" phase, there are hundreds of phases piled up on top of each other)


If it bugs you, flip it. I would not open up the amp just to do that.

Title: Re: reverb transformer....
Post by: John on April 27, 2015, 01:41:12 pm

It doesn't bug me.


Thanks!