Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Mook on April 27, 2015, 02:05:53 pm
-
So, I bought this Power Tranny from you about 10 years ago. I believe it's for a tweed deluxe.
I don't know the wiring layout. Can you help?
It has:
Green, G/Y, and Green -- These are for the 6.3V filaments.
Red, R/Y, and Red -- Secondary Power, with center tap.
Black, Black/Red, and Black/White --- I know they are primary, but I dunno what the voltages are......120v? 240v? Do you know?
Last, it has: Yellow, Yellow/White, and White -- I know somewhere these are 5V for filaments for tube recto, but what layout?
Here are pics:
-
That's the Marshall 18W PT. The diagram is on this page...
http://el34world.com/Transformers/marshall.htm (http://el34world.com/Transformers/marshall.htm)
-
That's the Marshall 18W PT. The diagram is on this page...
http://el34world.com/Transformers/marshall.htm (http://el34world.com/Transformers/marshall.htm)
OH! Thank you SO MUCH!!!! <3
Mook
-
Sorry, I did not see this post
Why was it posted in schematics?