Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Video Clips => Topic started by: super&plexi on September 06, 2015, 05:48:17 am

Title: Tweed Bluezmiester clips
Post by: super&plexi on September 06, 2015, 05:48:17 am

just uploaded 3 clips to youtube of recent build...still being tweaked...nothing fancy, no 'verb, outboard fx, just wanted to hear how audio translated from iphone video/camera straight to youtube upload.   3 different guitars, couple of speaker cabs,
 
I see why 12ay~12 au, & at's seem to be popular in these, as the dirt sound was just Awful with 12ax7 until I subbed ecc81 in V2.    V1 & V3 are more forgiving, also nfb is not completed, which results in a HUGE volume increase.


The audio is ok, but doesn't fully capture the bell like ring of the amps clean. also uses PT & OT from Crate V30 or 50, the one with 3x10''. all clips were recorded with amp powered through Variac-around 105V. Cathode R is 369..2 6L6gc +- 28watts...OT is designed for 4 el84's at 4R Ithink.
 
 http://youtu.be/dCGHF9lBLtk (http://youtu.be/dCGHF9lBLtk)     clean & dirty w/335 Epi soapbar rhythm, '59 Duncan lead
 http://youtu.be/VKu8MqRyZLQ (http://youtu.be/VKu8MqRyZLQ)              clean Warmouth strat hss 70's fender R, Duncan M, old DiMarzio PAF L
http://youtu.be/Srxt5PeESUc (http://youtu.be/Srxt5PeESUc)       clean & dirty Jackson 80's San  Dimas Hb,Hb,  Bill Lawrence L500's

Title: Re: Tweed Bluezmiester clips
Post by: tubenit on September 07, 2015, 06:44:14 am

Hey, your Tweed BluezMeister sounds GREAT!  Nice playing also.  I think you got a decent contrast between the clean and the OD also.

 :thumbsup: :thumbsup:

Well done!  Thanks for sharing your amp tone and playing!   IF (at some point) you record with reverb and/or delay,  I'd be very interested in hearing what your amp sounds like with the delay thru it.

Are you using the original TBM schematic and values?

With respect, Tubenit