Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Solid State => Topic started by: drgonzonm on September 18, 2015, 03:16:50 pm

Title: Fender squier 15
Post by: drgonzonm on September 18, 2015, 03:16:50 pm

Picked up a freebee SS amp from a relative.  Its a 94, Fender Squier amp.  The amp was damaged, and the PCB has a crack in it.    Looks like the amp fell over plugged in.  (It appears to be a common source of damage). 

Does any one know what the input jack p/n is?  Its all plastic with metal inserts.  (The ground ring, visible from the front is missing).

Also, need to know if there is a schematic for it? 

Thanks.     

Title: Re: Fender squier 15
Post by: Willabe on September 18, 2015, 03:47:47 pm

I don't know the part # but I'd bet AES has them.

Title: Re: Fender squier 15
Post by: DummyLoad on September 19, 2015, 02:33:06 pm

http://darrenriley.com/product-category/fender-amp-parts/jacks-fender-amp-parts/ (http://darrenriley.com/product-category/fender-amp-parts/jacks-fender-amp-parts/)


--pete

Title: Re: Fender squier 15
Post by: shooter on September 22, 2015, 08:10:35 am

Quote

if there is a schematic for it

quick surf I found this;

http://www.amparchives.com/album/Fender/Schematics/slides/Fender%20Squire%2015%20Schematic.html (http://www.amparchives.com/album/Fender/Schematics/slides/Fender%20Squire%2015%20Schematic.html) :l2:

Title: Re: Fender squier 15
Post by: drgonzonm on September 22, 2015, 07:11:38 pm

I knew the forum would come through.  Thanks.