Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: adamG on October 09, 2015, 04:59:59 am

Title: Tweed Overdrive Special - V2b-6 plate resistor
Post by: adamG on October 09, 2015, 04:59:59 am

Tubenit,

Sorry for direct question to you, but I've got started my build of TOS as initial circut http://el34world.com/Forum/index.php?topic=9636.0 (http://el34world.com/Forum/index.php?topic=9636.0) ,and I need to ask for V2b-6 plate resistor value.
Is it 180k or 120k that was indicated in this topic http://el34world.com/Forum/index.php?topic=9726.0 (http://el34world.com/Forum/index.php?topic=9726.0) ?

Thank you in advance.

Regards,

Adam

Title: Re: Tweed Overdrive Special - V2b-6 plate resistor
Post by: darkbluemurder on October 20, 2015, 05:57:34 am

Hi Adam,


I am not Tubenit but the resistor should be 180k.


I will be starting my build soon.


Cheers Stephan

Title: Re: Tweed Overdrive Special - V2b-6 plate resistor
Post by: tubenit on October 20, 2015, 12:21:35 pm

180k for V2b (V2-6) is correct.

Tubenit

Title: Re: Tweed Overdrive Special - V2b-6 plate resistor
Post by: adamG on October 21, 2015, 03:56:56 am

Thank you!;)

Title: Re: Tweed Overdrive Special - V2b-6 plate resistor
Post by: adamG on October 21, 2015, 04:00:34 am

Quote from: darkbluemurder on October 20, 2015, 05:57:34 am

I will be starting my build soon.

Are you going to present sound clips?
To me, clips are rather difficult.On that field, I am a kind of lazy man;)
Which circuit are you following?

Regards,

Adam

Title: Re: Tweed Overdrive Special - V2b-6 plate resistor
Post by: darkbluemurder on October 22, 2015, 02:37:41 am

I am not set up for sound clips.


I have not finally decided whether I follow the TOS circuit or whether I use a Bluesmaster tone stack for the clean mode.


Cheers Stephan